Oasis Sy

Another robust pump in the Oasis Sykes stable, the WP150 shares the same engineering pedigree and high efficiency priming system as all Oasis Sykes pumps. WP150 is used extensively on construction sites for dewatering, by oil companies, municipalities and utilities, and for marine applications.

HIGH-PERFORMANCE,LOW MAINTENANCE

Oasis Sykes Univac reputation for exceptional performance and low maintenance emanate from a carefully developed range of design features resulting from years of research and development.

At the heart of the unit the impeller is mounted on a large diameter pumps shaft with heavy duty bearing arrangement incorporating a roller bearing at the drive end and a heavy duty thurst bearing at the other. The reduced overhang between bearings and impeller means less shaft deflection and no problem with out of balance forces.

AUTOMATIC PRIMING

Oasis Sykes priming and re-priming is by flood-lubricating rotary sliding vane vacuum pump with high flow rate of air.

SPECIFICATION
 

High capacity general purpose pump, used for pumping wastewater, oily water, sewage, sludge and wellpoint dewatering.

Automatic priming and repriming with high flow rate vacuum pump.

Control panel containing

- Running hour meter - Ignition switch Two wheeled site trailer made from hollow sections and utilized as a fuel tank giving 24hrs running.

Low centre of gravity easy and stable to tow.

PERFORMANCE DATA
 

	Performance Max. Head : 40m Max. Flow : 360 m³/hr Max. Solids :50mm Pipe Connection Suction : 150mm(6") Discharge : 150mm(6")
	Hose Couplings Quick release hose adaptors for suction and discharge available Engine H394 KIRLOSKAR air cooled,electric start.          Rated Power : 21-35 bhp. Rated Speed : 1500-2500 rpm Prime System Flood lubricated rotary vacuum pump of nominal displacement 60cfm (102 m³/hr) incorporated, non-return valve.